Standard Walnut Butcher Block
Black Walnut (Fingerjointed)
Orders received by 4 p.m. Friday can be shipped as early as Friday of the following week.
Exceptions: Plank which exceed 48" in width often require several extra days.
Perfect Plank Co. does not maintain accounts. Most customers send a check at the time of
order or use a major credit card.
Orders are shipped freight collect from Oroville, California. Orders weighing more than 70
pounds are shipped via XPO Logistics. Orders weighing less than 70 pounds (within size
limits) can be shipped UPS. (Other limitations apply)
Upon receipt of order, it is essential that you inspect the freight for damage prior to signing
the delivery receipt! (DOES NOT APPLY TO UPS SHIPMENTS) Unsatisfactory merchandise
can be returned after receiving verbal approval from the Order Desk. Replacement will be
made for defects which are the result of manufacturing error. However, the Perfect Plank
Co. cannot accept responsibility for those defects which are inherent in the species of
wood. In all cases, the liability of the Perfect Plank Co. shall be limited to the sale price of
the item and shall not be extended to include the value of any labor or materials used in
finishing or installing the product.
Upon receipt, it is essential that you finish the ends and BOTH sides of the plank immediately in
order to avoid cupping or warping. All wood products are sensitive to changes in
temperature and humidity, and care must be taken to prevent exposure to environmental
extremes.
Perfect Plank Order Desk: 1-530-533-7606
2850 S Fifth Ave, Oroville, CA 95965
*Whenever possible, we send full thickness up to 1 7/8". If you need top to be specifically 1 3/4",
please let us know while ordering.
Black Walnut butcher block is our most luxurious product for counter tops, islands, and table tops.
Manufactured from Black Walnut native to the Appalachians and Midwest, it is made by finger-jointing
6" to 24" pieces of clear wood into strips of the desired length. The strips (anywhere from 3/4" to
2" wide) are then glued face-to-face with water resistant polyvinyl glue to form an edge-grain Butcher
Block product. Black Walnut Perfect Plank is made with the standard configuration in which the "finger-
joint" is visible on the face of the Butcher Block. Any natural or manufactured defects are patched and
sanded clean to yield a 1-side-good product. Reverse side is not patched and may contain small
natural/manufacturer defects.
Standard Black Walnut 1 ⅜” Butcher Block
Standard Black Walnut 1 3/4” Butcher Block*
Splashboard : 3/4 x 4"--$5.00 per lineal ft. 3/4 x 6"--$7.00 per lineal foot (with purchase
of similar butcher block sizes.)