Select Maple Butcher Block
Edge-Grain | Non Finger-Jointed | Made in the USA
Select Pacific Coast Maple 1 ⅜” Butcher Block
Select Pacific Coast Maple 1 ⅞” Butcher Block
Ordering Information
Orders received by 4 p.m. Friday can be shipped as early as Friday of the following week.
Exceptions: Plank which exceed 48" in width often require several extra days.
Perfect Plank Co. does not maintain accounts. Most customers send a check at the time of
order or use a major credit card.
Orders are shipped freight collect from Oroville, California. Orders weighing more than 70
pounds are shipped via XPO Logistics. Orders weighing less than 70 pounds (within size
limits) can be shipped UPS. (Other limitations apply)
Upon receipt of order, it is essential that you inspect the freight for damage prior to signing
the delivery receipt! (DOES NOT APPLY TO UPS SHIPMENTS) Unsatisfactory merchandise
can be returned after receiving verbal approval from the Order Desk. Replacement will be
made for defects which are the result of manufacturing error. However, the Perfect Plank
Co. cannot accept responsibility for those defects which are inherent in the species of
wood. In all cases, the liability of the Perfect Plank Co. shall be limited to the sale price of
the item and shall not be extended to include the value of any labor or materials used in
finishing or installing the product.
Upon receipt, it is essential that you finish the ends and BOTH sides of the plank immediately in
order to avoid cupping or warping. All wood products are sensitive to changes in
temperature and humidity, and care must be taken to prevent exposure to environmental
extremes.
Perfect Plank Order Desk: 1-530-533-7606
Pricing
2850 S Fifth Ave, Oroville, CA 95965
(530) 533-7606
Splashboard : 3/4 x 4"--$6.00 per lineal ft. 3/4 x 6"--$8.00 per lineal foot (with purchase
of similar butcher block sizes.)
Open Daily Monday-Friday
7:30am - 3:30pm
Durable. Clear Strips. Sustainably Made.
Our Select Maple Butcher Block is carefully graded and custom cut to
yield clear full length strips for customers objecting to Finger-jointed
products. Also crafted from Pacific Coast Maple sustainably grown on
the West Coast, this edge-grain butcher block is suitable for kitchen
countertops, islands, and tabletops.
How It’s Made
High Quality Maple lumber is ripped and graded so as to remove undesireable defects
naturally occuring in the wood. Strips are cut to yield the maximum usable lengths, saving
any remaining valuable shorter pieces to be incorporated into our Standard Maple Finger-
jointed product. These strips can also range from ¾” to 2” wide and are glued face to face
with water-resistant polyvinyl glue, forming a smooth and sturdy surface.
•
Edge-grain construction for strength and visual consistency
•
Patched and sanded top surface for a clean, ready-to-finish product
•
Unpatched bottom surface may include minor natural or manufacturer blemishes
•
Offered square edged and unfinished.
Sizes & Custom Options
•
Thicknesses: Up to 1 ⅞”
•
Widths: Up to 60” (5 feet)
•
Lengths: Up to 96” (8 feet)
Custom sizing available upon request. Limitations apply.
Why Choose Select Maple Butcher Block?
•
No finger-joints.
•
Naturally light, clean appearance compliments modern or rustic kitchens.
•
High hardness rating for everyday use (see scale above)
•
Made in the USA with sustainable Pacific Coast hardwood
Ready to Order?
Contact us with your desired species, quantities, and dimensions:
•
Phone: (530) 533-7606
•
E-mail: perfectplank@att.net
Need Help?
We’re available by phone or e-mail Monday-Friday between 7:30am - 3:30pm PST*
Submit an Online Inquiry here!
*Some major holidays excluded
Finger-jointed vs. Non-Finger-jointed.
It’s a common misconception that our Select Non-Finger-jointed Products are superior to
our Finger-jointed products. In truth, both configurations are high quality and excel in their
own ways.
A Finger-jointed Butcher Block goes through a manufacturing process that improves the
strength and stability of the wood strips. Millworkers are able to look for straight grain,
separate color variation, and create custom finished lengths. With these factors in place, the
use of these smaller blocks creates the blended mix of grain and subtle color variation
that butcher block is well known for.
A Non-Finger-jointed Butcher Block uses a similar sorting process, but takes place much
earlier in the operation. Longer length strips (free of defects) are much more rare and can
be difficult to source. Still, the use of full length uninterupted strips naturally create a
beautiful product with consistent color and grain, but must be limited lengthwise in
order to maintain stability over the natural unpredictable tendency of continuous wood.
Visit our FAQ page for more information about Finger-joints!
