Mixed Species Butcher Block
Black Walnut (Fingerjointed) & Pacific Coast Maple (Fingerjointed)
Orders received by 4 p.m. Friday can be shipped as early as Friday of the following week.
Exceptions: Plank which exceed 48" in width often require several extra days.
Perfect Plank Co. does not maintain accounts. Most customers send a check at the time of
order or use a major credit card.
Orders are shipped freight collect from Oroville, California. Orders weighing more than 70
pounds are shipped via XPO Logistics. Orders weighing less than 70 pounds (within size
limits) can be shipped UPS. (Other limitations apply)
Upon receipt of order, it is essential that you inspect the freight for damage prior to signing
the delivery receipt! (DOES NOT APPLY TO UPS SHIPMENTS) Unsatisfactory merchandise
can be returned after receiving verbal approval from the Order Desk. Replacement will be
made for defects which are the result of manufacturing error. However, the Perfect Plank
Co. cannot accept responsibility for those defects which are inherent in the species of
wood. In all cases, the liability of the Perfect Plank Co. shall be limited to the sale price of
the item and shall not be extended to include the value of any labor or materials used in
finishing or installing the product.
Upon receipt, it is essential that you finish the ends and BOTH sides of the plank immediately in
order to avoid cupping or warping. All wood products are sensitive to changes in
temperature and humidity, and care must be taken to prevent exposure to environmental
Perfect Plank Order Desk: 1-530-533-7606
Toll Free Number: 1-800-327-1961
2850 S Fifth Ave, Oroville, CA 95965
*Whenever possible, we send full thickness up to 1 7/8". If you need top to be specifically 1 3/4",
please let us know while ordering.
Due to popular request, Perfect Plank has introduced a new mixed species Maple and Walnut line
of butcher block. Similar to all of our other options, this new product is also made by finger-jointing
wood into strips of the desired length to be glued face-to-face with water resistant polyvinyl glue to
form an edge-grain Butcher Block product.
Unlike our other products, however, the strips used in this butcher block may or may not match in
their individual widths. For example, a butcher block may comprise of both 1 ¼ “ Maple strips and 1 ¾”
Walnut strips. This will not affect the thickness of the product, only the appearance on the face. Any
natural or manufactured defects are patched and sanded clean to yield a 1-side-good product. Reverse
side is not patched and may contain small natural/manufacturer defects.
Standard Mixed Maple/Walnut 1 ⅜” Butcher Block
Standard Mixed Maple/Walnut 1 3/4” Butcher Block*
** Potentially limited to West Coast deliveries due to shipping difficulties with
excessive widths. Ask about edging boards to be clamped on location!
Splashboard : 3/4 x 4"--$5.00 per lineal ft. 3/4 x 6"--$7.00 per lineal foot (with purchase of
similar butcher block sizes.)
-Mixed Species can have multi-
lamination configurations, ranging
between ¾” to 1 ¾”.
-Currently offering Maple and Walnut
mix only. No customizations in wood
types nor custom strip configuration at
-Butcher Block will have fingerjoints
(not shown in example to the left).
More photos to come!